Version Sitefinity 12.1
Sitefinity 14.4 Sitefinity 14.3 Sitefinity 14.2 Sitefinity 14.1 Sitefinity 14.0 Sitefinity 13.3 Sitefinity 13.2 Sitefinity 13.1 Sitefinity 13.0 Sitefinity 12.2 Sitefinity 12.1 Sitefinity 12.0

Topics

All topics

More than one environment

Current setup

Environments: You have one of the following set of environments:

  • Development and one or more Test
  • Development and Staging
  • Development, one or more Test, and Staging
  • Development, one or more Test, and Live
  • Development, Staging, and Live
  • Development, one or more Test, Staging, and Live

SiteSync: You have a system with or without SiteSync.

Desired setup

Environments: You want to setup in Continuous integration the following environments:

  • Development environment
  • One or more Test environments
  • Live environment

SiteSync: You do not want to use SiteSync.
PREREQUISITES: Before you setup the Continuous delivery process, perform the following:
  • Make sure that the project code is the same both on your Live and Development environments:
    If you have any development in progress on your Development environment, make sure you complete it and release it to Live, before you continue with setting up the Continuous delivery process.
  • Upgrade your project on all environments to Sitefinity CMS 9.2 or above.
    For more information, see Upgrade.

Migrate the configurations

Before you setup Continuous delivery, you must determine the storage mode of your configuration files.
For more information, see Determine the storage mode of configurations.

If your configurations are stored in the database, you must first migrate them.
For more information, see Migrate configurations.

Setup the Development environment

In your Development environment, open your project and perform the following:

  1. Download your latest database and restore it to your Development environment.
    • If you already have Development and Live environments, download the database from Live.
    • If you already have Development and Staging environments, download the database from Staging.
    • If you have Development and Test environments, download the database from Test.
  2. Change the connection string in the DataConfig.config to point to the restored database.
  3. Make sure Read-only mode of configurations is turned off.
  4. Make sure the Staging & Syncing module is deactivated.
  5. Set Deployment mode to Source.
  6. Turn on Auto-storage of configurations.
  7. Restart the application.

RESULT: Your Development environment is setup for Continuous delivery and you can deploy your project to Test environments.

Setup the Test environment
  1. Deploy your project without the database from your Development environment to your Test environment.
  2. Download your latest database and restore it to your Test environment.
    • If you already have Development and Live environments, download the database from Live.
    • If you already have Development and Staging environments, download the database from Staging.
    • If you have Development and Test environments, then the latest database is already on Test.
  3. Change the connection string in the DataConfig.config to point to the restored database.
  4. Open your deployed project and make the following settings:
  5. Verify that the project is working correctly.
  6. Perform this procedure for every Test environment that you want to have.

RESULT: Your Test environments are setup for Continuous delivery and you have a project that is ready for deployment to Live environment.

Setup the Live environment.
  1. Deploy your project without the database from your Test environment to your Live environment.
    For more information on deployment options and procedures, see Deployment.
  2. If your project was not deployed to Live previously, download and restore the latest database.
    • If you already have Development and Staging environments, download the database from Staging.
    • If you have Development and Test environments, download the database from Test.
  3. Change the connection string in the DataConfig.config to point to the Live database.
  4. Run the project.

RESULT: Your project is Live. Your environments are continuously integrated and ready for Continuous delivery.

Want to learn more?

Sign up for our free beginner training. Boost your credentials through advanced courses and certification.
Register for Sitefinity training and certification.

Was this article helpful?