After you setup the default health checks, you can add additional, configurable health checks.
Available configurable health checks you can specify are:
For details on additional health check types and required parameters, see Health check types.
NOTE: The default value is 30 seconds.
After you add health checks and their parameters, you must restart the site to enable the updated Health check service.
You can now run the newly created health check with the following HTTP request:
NOTE: In case you run a check for more than one group, all checks associated with at least one group from the list are executed.
NOTE: Health check results are cached for 10 seconds. If you run the check again within the 10 seconds, you get the same response.
To edit the settings of a health check, expand the Health check node and click on the specific check, for example Google check. If you have opted to log all check tasks to a dedicated file, previous check data is not deleted. New task data is stored in the same file as well.
NOTE: If you edit the check type, make sure you replace it with a viable type and its required parameter. For details, see Health check types.
To delete a health check altogether, click on the Health check node and then on the trash can icon next to the check.
Back To Top
Copyright © 2018 Progress Software Corporation and/or its subsidiaries or affiliates.
All Rights Reserved.